|
|
|
|
PulseWorx RF is a family of
wireless, self-powered devices that expands The EnOcean technology harvests the energy in the button press to provide power to the built in radio transmitter. The RF signals transmitted are then converted into UPB by the Radio Frequency Interface, allowing full control, including on/off and dimming, of all UPB devices. Complete control without wires or batteries! Devices can be mounted on any type of surface: wood, sheetrock, glass, concrete or tile. The RFI-E Receiver is the crossing point which receives the EnOcean RF signals and translates them into UPB powerline technology. Up to eight RF devices can be programmed in each RFI-E. The RFI-E, Radio Frequency Interface is a plug-in interface that receives a discreet RF code from any EnOcean enabled device. Each RF code is translated into a UPB signal which is transmitted on the existing powerline. This allows control from any location with any optional EnOcean RF switch, Hand-held Key Fob remote or Occupancy Sensor The RFI-E can accept Enocean commands from 8 independent devices. Each signal can be programmed to transmit any UPB command. The button Mode may be customized with separate actions for single tap, double tap, press and hold, and release. The RFWS Radio Frequency Wall Switches are a set of wireless/battery-less devices designed to control your UPB lighting system remotely. The Wall Switches provide both single and dual wall mounted rocker switch control to areas where AC power is not conveniently available. The RFWS is available in two versions, a single rocker style and a dual rocker style, both of which fit in a standard decorator style wall plate and junction box. The dual rocker version has the function of two dimmers in one unit. Developed for indoor use these modules are available in white, light almond, ivory, black and brown. The RFR4 Radio Frequency Remote provides a durable 4 button handheld for remote activation control of UPB devices. Available in Black, White and Silver. The RFOC Occupancy Sensor covers an area of 1500 sq. ft. and has a built-in solar panel that allows ambient or sunlight to power it. It will operate up to 48 hours without light - optional batteries may be required for continuous operation. Heater vents will not trigger the sensor. Key Benefits
Pricing
|
|
Send mail to
support@digitalavnew.com with
questions or comments about this web site.
|
